Every ACMER machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. P1 (Diode 20W, Diode 10W): 86 settings · P1 S Pro (Diode 20W, Diode 48W): 86 settings · P2 (Diode 33W, Diode 20W): 86 settings · P2 10W (Diode 10W): 86 settings · P2 20W (Diode 20W): 86 settings · P2 33W (Diode 33W): 86 settings · P3 (Diode 24W, Diode 48W): 86 settings · S1 (Diode 6W): 80 settings · S2 (Diode 20W, Diode 12W): 86 settings · S2 Pro (Diode 36W, Diode 48W): 86 settings.
In total 854 settings are published for this brand across 16 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your ACMER machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.