Every Genmitsu machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. Jinsoku LC-40 (Diode 5W, Diode 10W): 83 settings · Jinsoku LC-50 Plus (Diode 5.5W): 40 settings · Jinsoku LE-1620 (Diode 5W): 81 settings · Jinsoku Z-1 10W (Diode 10W): 40 settings · Jinsoku Z-1 20W (Diode 20W): 40 settings · Kortek (Diode 5W, Diode 2W, Diode 10W): 76 settings · L8 (Diode 20W, Diode 40W): 84 settings · LC-40 10W (Diode 10W): 40 settings · LC-40 5W (Diode 5W): 40 settings · LE5040 (Diode 5W): 83 settings.
In total 607 settings are published for this brand across 14 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Genmitsu machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.