Every StyleCNC machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. ST-FC1325 (Fibre 1000W): 13 settings · ST-FC1390 (Fibre 1500W): 13 settings · ST-FC3015E (Fibre 1500W): 13 settings · STJ-30F (Fibre 30W): 13 settings · STJ-3U (UV 3W (355nm)): 13 settings · STJ-50F (Fibre 50W): 13 settings · STJ1325 (CO2 150W): 86 settings · STJ1390 (CO2 100W, CO2 150W): 86 settings · STJ1610 (CO2 100W): 86 settings · STJ6090 (CO2 80W): 86 settings.
In total 422 settings are published for this brand across 11 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your StyleCNC machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.