Every Atomstack machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. A10 Pro (Diode 10W): 78 settings · A20 Pro (Diode 20W): 78 settings · A24 Pro (Diode 24W): 78 settings · A30 Pro (Diode 33W): 78 settings · A5 M50 Pro (Diode 5W): 78 settings · A70 Pro (Diode 70W): 78 settings · M4 (Infrarouge 2W (1064nm)): 12 settings · MR20 (Fibre 20W): 12 settings · S10 Pro (Diode 10W): 78 settings · S20 Pro (Diode 20W): 78 settings · S30 Pro (Diode 33W): 78 settings · S40 Pro (Diode 48W): 78 settings · X20 Pro (Diode 20W): 78 settings · X30 Pro (Diode 33W): 78 settings · X7 Pro (Diode 10W): 78 settings · X70 Max (Diode 70W): 78 settings.
In total 1116 settings are published for this brand across 16 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Atomstack machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.