Every Creality machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. CR-Laser Falcon (Diode 5W, Diode 10W): 86 settings · Falcon 2 (Diode 40W, Diode 22W): 86 settings · Falcon 2 Pro (Diode 22W, Diode 60W, Diode 40W): 86 settings · Falcon A1 / A1 Pro (Diode 20W, Diode 10W): 86 settings · Falcon2 12W (Diode 12W): 78 settings · Falcon2 22W (Diode 22W): 78 settings · Falcon2 40W (Diode 40W): 78 settings · Falcon2 Pro 22W (Diode 22W): 78 settings · Falcon2 Pro 40W (Diode 40W): 78 settings · Falcon2 Pro 60W (Diode 60W): 78 settings.
In total 812 settings are published for this brand across 15 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Creality machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.