Every Gweike machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. Cloud Basic (CO2 50W): 84 settings · Cloud Pro II (CO2 50W): 82 settings · Cloud RF (CO2 40W): 84 settings · G1 (Diode 10W): 84 settings · G2 (Fibre 20W): 12 settings · G2 Fiber 30W (Fibre 30W MOPA, Fibre 30W): 34 settings · G6 Split (Fibre 60W MOPA): 12 settings · LC400 Pro (Diode 10W): 84 settings.
In total 476 settings are published for this brand across 9 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Gweike machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.