Every Flux machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. Ador (Diode 20W, Infrarouge 2W (1064nm)): 64 settings · Beambox (CO2 40W): 72 settings · Beambox Pro (CO2 50W): 72 settings · beamo (CO2 30W): 72 settings · HEXA (CO2 60W): 72 settings.
In total 352 settings are published for this brand across 6 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Flux machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.