Every LaserPecker machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. 1 Pro (Diode 0.5W): 76 settings · 2 (Diode 5W): 76 settings · 3 (Infrarouge 1W (1064nm)): 12 settings · 4 (Diode 10W, Infrarouge 2W (1064nm)): 81 settings · LP2 (Diode 5W, Infrarouge 1W (1064nm)): 78 settings · LP3 / LP4 (Diode 5W, Infrarouge 2W (1064nm)): 79 settings · LX1 / LP5 (Diode 20W, Infrarouge 2W (1064nm)): 80 settings.
In total 482 settings are published for this brand across 11 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your LaserPecker machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.