Every Full Spectrum Laser machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. Flatbed 4x8 (CO2 150W): 82 settings · Muse 3D (CO2 45W): 74 settings · Muse Core (CO2 40W): 72 settings · Muse Galvo CO2 (CO2 30W): 77 settings · Muse Galvo Fiber (Fibre 20W): 13 settings · Muse Galvo UV (UV 5W (355nm)): 13 settings · Muse Titan (CO2 100W): 75 settings · P-Series 20x12 (CO2 45W): 79 settings · P-Series 24 (CO2 90W): 73 settings · P-Series 24x16 (CO2 90W): 80 settings · P-Series 36x24 (CO2 90W): 81 settings · P-Series 48x36 (CO2 100W): 82 settings.
In total 801 settings are published for this brand across 12 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Full Spectrum Laser machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.