Every Longer machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. B1 20W (Diode 22W): 40 settings · B1 30W (Diode 30W): 76 settings · B1 40W (Diode 40W): 40 settings · Laser B1 20W (Diode 22W): 76 settings · Laser B1 40W (Diode 40W): 76 settings · Nano (Diode 5W): 76 settings · Nano 6W (Diode 6W): 76 settings · Nano Pro 12W (Diode 12W): 76 settings · Ray5 (Diode 10W, Diode 5W): 84 settings · Ray5 10W (Diode 10W): 76 settings · Ray5 20W (Diode 20W): 76 settings · Ray5 5W (Diode 5.5W): 76 settings.
In total 848 settings are published for this brand across 13 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Longer machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.