Every Vevor machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. 100W CO2 (CO2 100W): 72 settings · 10W (Diode 10W): 78 settings · 20W (Diode 20W): 78 settings · 20W Fiber (Fibre 20W): 13 settings · 30W Fiber (Fibre 30W): 13 settings · 5.5W (Diode 5.5W): 78 settings · 50W CO2 (CO2 50W): 72 settings · 50W Fiber (Fibre 50W): 13 settings · 60W CO2 (CO2 60W): 72 settings · VV-40W CO2 (CO2 40W): 72 settings · VV-80W CO2 (CO2 80W): 72 settings.
In total 633 settings are published for this brand across 11 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Vevor machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.