Every ComMarker machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. B3 (Fibre 20W, Fibre 30W): 34 settings · B4 (Fibre 30W, Fibre 20W, Fibre 60W, Fibre 50W): 42 settings · B4 Fiber (Fibre 20W MOPA, Fibre 50W MOPA, Fibre 30W MOPA): 42 settings · B4 UV (UV 5W (355nm), UV 3W (355nm)): 34 settings · B6 (Fibre 60W, Fibre 100W): 34 settings · B6 Fiber (Fibre 20W MOPA, Fibre 60W MOPA): 34 settings · Omni 1 UV (UV 3W (355nm)): 12 settings.
In total 232 settings are published for this brand across 16 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your ComMarker machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.