Every xTool machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. D1 Pro (Diode 10W, Diode 5W, Diode 20W): 86 settings · F1 (Infrarouge 2W (1064nm), Fibre 2W): 34 settings · F1 Ultra (Fibre 20W MOPA, Diode 20W): 82 settings · F2 (portable) (Diode 15W, Infrarouge 5W (1064nm)): 74 settings · F2 Ultra (Diode 40W, Fibre 60W MOPA): 76 settings · F2 Ultra UV (UV 5W (355nm)): 12 settings · M1 / M1 Ultra (Diode 10W, Diode 5W): 86 settings · M2 (Diode 10W, Diode 20W): 86 settings · M2 Ultra (Diode 20W, Diode 10W): 86 settings · P2 / P2S (CO2 55W): 86 settings · P3 (CO2 80W): 85 settings · S1 (Diode 10W, Diode 2W, Diode 40W, Diode 20W): 86 settings · S1 Pro (Diode 20W, Diode 40W): 86 settings.
In total 965 settings are published for this brand across 26 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your xTool machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.