Every Universal Laser Systems machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. ILS 12.150D (CO2 150W): 81 settings · ILS12.150D (Fibre 50W, CO2 150W): 83 settings · ILS9.75 (CO2 75W): 74 settings · PLS4.75 (CO2 75W): 77 settings · PLS6.150D (Fibre 50W, CO2 150W): 81 settings · PLS6.75 (CO2 75W): 76 settings · ULTRA 9 (CO2 150W): 84 settings · ULTRA R5000 (CO2 150W): 84 settings · VLS 3.50 (CO2 50W): 80 settings · VLS2.30DT (CO2 30W): 80 settings · VLS3.60DT (CO2 60W): 80 settings · VLS3.75 (CO2 75W): 80 settings · VLS4.75 (CO2 75W): 79 settings · VLS6.75 (CO2 75W): 78 settings.
In total 1117 settings are published for this brand across 16 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Universal Laser Systems machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.