Every Sculpfun machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. G9 (Diode 10W, Infrarouge 2W (1064nm)): 57 settings · iCube 3W (Diode 3W): 77 settings · iCube Pro (Diode 5W): 81 settings · iCube Pro Max (Diode 10W): 82 settings · iCube Ultra (Diode 12W, Infrarouge 1W (1064nm)): 56 settings · S10 (Diode 10W): 84 settings · S30 (Diode 5W): 84 settings · S30 Pro (Diode 10W): 84 settings · S30 Pro Max (Diode 20W): 84 settings · S30 Ultra (Diode 22W): 83 settings · S9 (Diode 5W): 84 settings · SF-A9 (Diode 40W): 80 settings.
In total 936 settings are published for this brand across 14 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Sculpfun machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.