Every NEJE machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. 3 (Diode 5.5W): 84 settings · 3 Max (Diode 10W): 84 settings · 3 Plus (Diode 10W, Diode 11W): 80 settings · 3 Pro (Diode 10W, Diode 5.5W): 79 settings · Max 4 (A40640) (Diode 12W): 84 settings · Max 4 (E80) (Diode 24W): 84 settings.
In total 495 settings are published for this brand across 8 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your NEJE machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.