Every Two Trees machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. Totem S (Diode 5.5W): 76 settings · TS2 (Diode 10W): 76 settings · TS2 10W (Diode 10.0W): 76 settings · TS2 20W (Diode 20.0W): 76 settings · TS3 (Diode 10.0W): 76 settings · TS4 / Trident (Diode 40W, Diode 20W): 84 settings · TTS-10 Pro (Diode 10.0W): 76 settings · TTS-20 Pro (Diode 20.0W): 76 settings · TTS-55 (Diode 5W): 76 settings.
In total 692 settings are published for this brand across 10 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Two Trees machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.