Every DIY / Machine maison machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. CO2 GRBL 32 bits (tube) (CO2 60W, CO2 40W, CO2 80W): 86 settings · Diode GRBL 32 bits (Diode 15W, Diode 10W, Diode 40W, Diode 30W, Diode 20W): 70 settings · Diode GRBL 32 bits + infrarouge (Diode 40W, Diode 20W, Infrarouge 2W (1064nm)): 85 settings.
In total 241 settings are published for this brand across 11 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your DIY / Machine maison machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.