Every Gravotech machine is listed with its laser sources: wattage changes everything, a 10 W diode and a 40 W diode do not cut the same plywood. F20 (Fibre 20W): 13 settings · F30 (Fibre 30W): 13 settings · H10 (Infrarouge 10W (1064nm)): 13 settings · LS100 Energy (CO2 25W): 84 settings · LS100 Ex (CO2 80W, CO2 60W): 83 settings · LS1000 XP (CO2 100W): 86 settings · LS900 (CO2 80W): 86 settings · LS900 XP (CO2 100W): 86 settings · LW1 Fiber (Fibre 20W, Fibre 50W): 35 settings · LW2 (UV 3W (355nm), Infrarouge 10W (1064nm), Fibre 50W): 43 settings · LW2 Touch (Fibre 50W, UV 3W (355nm), Infrarouge 10W (1064nm)): 43 settings · WeLase (Infrarouge 10W (1064nm), Fibre 30W, UV 3W (355nm), CO2 30W): 78 settings.
In total 663 settings are published for this brand across 21 laser sources: for each machine, source, material and thickness combination you get power in percent, speed in mm/min, a pass count and whether air assist is needed.
A setting is a starting point, not an absolute truth: the lens, mirror cleanliness, the exact wood species and humidity all move the result. Run a small test square on an offcut of the same board first, then adjust speed before power — speed is the forgiving one.
If your Gravotech machine is missing, you can request it: the catalogue watch checks the brand's new releases every week and settings are generated as soon as a model is referenced.